REMOTE TERMINAL EMULATOR VERSION 1.0 COPYRIGHT (C) 1995 RODNEY C. CASEY INTRODUCTION: REMOTE TERMINAL EMULATOR is a communications program that will allow any PC (IBM PC OR COMPATIBLE) to communicate with a remote computer over a phone line and will emulate an ANSI terminal. RTERME.COM IS SHAREWARE. If you find RTERME.COM useful please send $10.00 to address below. Rod Casey P. O. 1136 HANFORD, CA 93232-1136 OPERATION: The following files must exist in the same directory: RTERME.COM MESSAGE.DAT ANSI.DAT The program uses COM1. NOTE! IF THE PROGRAM LOCKS UP YOU MAY NEED TO DO A RE-BOOT YOUR COMPUTER. To execute the program enter: RTERME.COM ANSI.DAT press enter and follow will be displayed: DIAL STRING: ________________________ BPS........: _ PARITY.....: _ DATA LENGTH: _ STOP BITS : _ Use the TAB key to move from between fields. After all information is entered press the ENTER key. At this point you should see the DIAL STRING displayed and modem should be dialing. If this not the case check all cables and re-boot your computer and trying running RTERME.COM again. In the DIAL STRING field enter atdt5551212, to request that the modem dial the phone 5551212. Check your modem manual for a list of valid AT formats. The other fields should be self explanatory. Check the values displayed within the "()'s" for the valid values for each field. To end to program press Alt-F4. ----------------------------------------------------------- ----------------------------------------------------------- DISCLAIMER ---PLEASE READ--- IT IS THE USERS RESPONSIBILITY TO DETERMINE THE FITNESS OF THE ABOVE PROGRAM. RODNEY C. CASEY WILL NOT BE LIBEL FOR ANY DAMAGE TO ANY DATA OR ANY HARDWARE BY USING RTERME.COM. NO WARRANTY IS OFFERED OR IMPLIED. BUG REPORTING: If you find RTERME.COM to have any bugs, or if you have any questions please fell free to drop me a line. You can contact me on COMPUSERVE 74452,733. REV.DATE 060295